28/34FordParts

*NEW*

SuperBell Axles

........................$1025

..................$1175

Aluminum

..............call

........call

.....................call

28-34 FORD PARTS & ACCESSORIES

Frames, Eng & Trans Mts, Brake Pedal, Rear Mt Kits & more

Complete TRADITIONAL Rolling Chassis

I am building an all new Brookville Steel '32 Roadster Hi-Boy

and a new Brookville Steel 30/31 Roadster with a 4" channel and a 4" stepped front & rear frame for a REAL LOW RIDE!

ALL WILL BE TRUE NOSTALGIA STYLE!

USING ONLY ALL THE BEST!

ANY CAN BE YOURS. YOU CAN FINISH PAINT TO SUIT YOU!

I will be putting pics and info on my website as I progress.

PLEASE CLICK ON THE BUTTON BELOW FOR UPDATES!

WATCH FOR Butch's Super Neat, Old Timey, New but Nostalgia "BCS" PARTS COMING SOON!

4" Dropped Thick style I-Beam axle, with "BCS" Filled Ends. "DAGO" style! (available solid, drilled, plain, coated or chrome)

AND a Special "BCS" Front Radius Rod Kit, all "OLD" School!

ALL 28/40 Chassis available Totally Built "BCS" Nostalgia Style!

(choice of powertrain mounts, ready to bolt in eng/trans & body)

NEW '40 Ford Dash cut down by Butch to fit '32 Fords (bolt-in)

'32 Gibbon Body 5-W I built several years back, BRS chassis with 4-Bar front and rear, 8" Ford Rear Axle, CE Vintage Dropped I-Beam front, Roller/Rocker SVO 302 Ford with AOD automatic overdrive... Super Neat!

'32 Downs Body 3-W, I built around 1992, BRS chassis with 4-Bar front, 4" Dropped Tube front with SuperBell Disc & Posie low spring, 350 Chev with 350TH & a 9" Rear mounted with Pete & Jakes Triangulated 4-Bar with Alden Coil Overs. Running those special Eric Vaughn Wheels.... A REAL BAD BOY!

All Ford Stuff (works fine on most Ply-Dod-Chev cars too!)

28/32 Dual Pedal Kit incl Dual Master Cyl & Clutch Cyl w/Slave cyl.$359

32/34 Rear Buggy Spring Mount Kit

with Shackles, specify Housing dia.......$ 95

28/40 Front CHROME Shocks (Pairs)

2 lengths, specify 14" (std) and 11" (short).....$ 95

28/40 Rear CHROME Shocks

14-1/2" length...$105pr With Shock Mt Kit...$135

28/34 Front CHROME Hairpin

Radius Rod Kit w/Spherical Rod End at rear...$499

Most all Pete & Jakes and SuperBell products available here....call

butch@butchscoolstuff.com

Questions?

Email me

at this link:

QUESTIONS?...Email me at: info@butchscoolstuff

1932 FORD REPRO FRAMES COMPLETE & ROLLING

ALL TRADITIONAL STYLE, with stamped 1-pc rails!

BOXED BARE FRAMES AS SHOWN FROM $1890.

28/31 Model A and 1932 K-Member or X-Member

Trans Crossmembers coming soon!

Made to accept most transmissions.

#AU-2106...........$279

#AU-2107...........$279

#2855.................$379

I-Beam.......

#AU-2203...........$ 40

#AU-2203PS......$ 70

..........................call

.........................$ 25

for use with 46" Axles...............#FS-2834FB........$ 99

for use with 47" Axles...............#FS-2834VT........$ 99

for use with 46" Axles...............#1005L (low).......$136

Extra LOW for 46" axle, Rolled & Tapered leaves...#1005RT.............$199

for use with 47" Axles...............#1004L (low).......$136

Extra LOW for 47" axle, Rolled & Tapered leaves...#1004RT.............$199

Chrome & Coated Available......call

Traditional with Radius Rods.....call

REAR

Butch's 1932 Quarter Elliptic Rear Suspension Kit

coming soon! Custom kit using POSIE'S Parts

with a Radius Rod or Triangulated Bar Kit.

Let "Butch" build a Nostalgia '32 HotRod Cpe or Roadster for YOU!

Click the button BELOW for INFO on NEAT NEW HOTRODS we are building!

>>>>>>>>>>>> <<<<<<<<<<<

37/40 FORD STYLE ROUND BACK SPINDLES

NICE used pair with steering arms, checked, glass beaded and ready to paint and use...................................#Used37/40FSP...$199

Nice used pair as above, EXCEPT they are 42/48 square-

back style, checked, beade blasted............#Used42/48FSP...$179

NEW Pr w/Nuts and Washers.......................#AR-2020NW........$255

Pair above with KingPin set installed...........#AR-2020BKP......$335

DROPPED STEERING ARMS FOR ABOVE

Pair of standard steering arms...........................#AR-2121S.....$100

Pair of arms Milled for Disc Brake clearance...#AR-2121M.....$110

NEW "WILSON" FINNED ALUM BACKING PLATES FOR 37/40 FORD STYLE ROUND SPINDLES

NICEST SETUP AVAILABLE TODAY, THESE ARE FANTASTIC LOOKING AND ARE GREAT BRAKES TOO!!!!

These include the complete self energizing Lincoln type brakes with shoes & wheel cylinder installed, ready to go..........................$495

Nice used pair of 59/60 Buick Finned Aluminum 45 FIN Brake Drums..........................................................................................................$350

Nice pair same as above except these are 61/66 Buick 90 FIN Brake Drums..............................................................................................$275

HUBS LISTED BELOW ARE NEEDED TO ADAPT THE BUICK DRUM ABOVE TO THE 37/48 FORD SPINDLES

NEW Pair WALDEN ALUMINUM 4-1/2". 4-3/4" 5-1/2" Multi-Bolt-Circle Hubs with Ford bearings & seals for above drum conv.........$450

NEW Pair WILSON IRON 4-1/2", 4-3/4", 5-1/2" Multi-Bolt-Circle Hubs with Ford bearings & seals for above drum conversion. .......$350

COMPLETE SETUP ABOVE WITH FINNED BACKING PLATES & DRUMS WITH CENTER HUBS INSTALLED & TURNED

Package complete with 45 FIN drums and Aluminum Hubs installed and turned, ready to bolt onto spindles...................................$1350

Package complete with 90 FIN drums and Iron Hubs installed and turned, ready to bolt onto spindles...............................................$1175

59/60 Buick

Aluminum

45 FIN Drum

& WALDEN Aluminum Multi-HUB

WILSON FINNED ALUMINUM Backing Plates

THESE ARE BEAUTIFUL AND

ARE IN STOCK

Complete Front Axle Packages using 4" or 5" drop I-Beam or Tube Axles, with Traditional Hairpin Radius Rods, or Butch's own CUSTOM (straight top bar, curved bottom bar, OLD timey Real HotRod style) Radius Rods, or.......

Available with new Fatman's Wishbones or regular 4-bars.......Your choice!

QUESTIONS?...Email me at: info@butchscoolstuff

.......$110

.......$119

MORE TRADITIONAL STYLE PARTS FROM BCS!

FATMAN'S NEW SPLIT WISHBONES

Why hunt for old, beat-up, rusty bones that are so old they may not be usable?

ABSOLUTELY BEAUTIFULL

These, ALL NEW, SUPER HIGH QUALITY Wishbones are available in several

DIFFERENT STYLES & LENGTHS, with design holes or smoothies as shown

from $499 a pair...........Please call with your needs!!!

37/41 FORD STYLE

ROUND BACK SPINDLES

SPECIAL

NOW $299.

Pair of above FORGED SPINDLES with KingPin set installed....#AR-2020BKP Regular Price........$335

QUESTIONS?...Email me at: info@butchscoolstuff

27" HAIRPIN RADIUS ROD SET, GREAT FOR 28/34 HI-BOY OR FULL FENDERED HOTRODS

Totally Traditional with Clevis front ends and Aluminum Spherical (Heim) Rod ends at frame end.

(THESE ARE ALSO SOLD IN BARE STEEL for $329)

These are proffesionaly built from 7/8" OD Seamless Tube and Tig (Heli-Arc) welded for strength.

SPECIAL NOW $379. (Powder Coated in a Chrome-Like finish) Regular Price........$429

NEW '28 thru '31 FORD Model A HOTROD FRAMES (Above)

Why hunt for old, beat-up, rusty frames that are so old they may not be usable?

These, ALL NEW, SUPER HIGH QUALITY, PRECISION WELDED PEREMETER FRAMES

Built to exact dimensions with Body Mounts installed (not shown).

BARE FRAMES WITH 2" REAR KICK-UP (AS SHOWN)........FROM $749.

We will build it YOUR WAY!

Standard Ready to Roll Type Chassis, HairPins front and rear, dropped I-Beam axle set-up, SB Chev or Ford eng/trans mts, (Flathead and many others available at extra $), Vega steering complete, with a bare 8" Ford rear axle housing installed with Coils or Quarter Eliptic Springs.....

FROM $6490.

Please call with your needs!!!

NEW 28/29 FORD "A" Hi-Boy on '32 HOTROD FRAME (Above)

Why hunt for old, beat-up, rusty frames that are so old they may not be usable?

These, ALL NEW, SUPER HIGH QUALITY, PRECISION WELDED, FULLY BOXED, PEREMETER FRAMES PINCHED AT THE COWL FOR THE 28/29 "A" Body

BARE FRAME WITH Stock '32 REAR KICK-UP (AS SHOWN)........FROM $1990.

BARE FRAME WITH KICKED IN AND FLATTENED "A" STYLE REAR RAILS..FROM $2390

We will build it YOUR WAY!

FROM $7990.

Please call with your needs!!!

IN STOCK

Bare steel Hairpin kit IN STOCK

SPECIAL @ $359

IN STOCK

27" BCS STRAIGHT TOP RADIUS ROD SET, GREAT FOR 28/34 HI-BOY OR FULL FENDERED HOTRODS

Totally Traditional with Clevis front ends and Aluminum Spherical (Heim) Rod ends at frame end.

(ALSO AVAILABLE POWDER COATED IN A CHROME LIKE, HI SHINE, FINISH for $379)

This coating will last longer than any paint or chrome finish you could use. It is great on all chassis parts. These are proffesionaly built from 1" OD Heavy Wall Seamless Tubing for strength.

SPECIAL NOW $329. (Bare steel) Regular Price........$379

THESE ARE SOLD IN BARE STEEL or the POWDER COATED FINISH SHOWN!

THESE ARE SOLD IN POWDER COATED or the BARE STEEL FINISH SHOWN!

HAIRPIN STYLE

STRAIGHT TOP STYLE

IN STOCK

NOTE: THE BEST WAY TO CONTACT ME IS TO

EMAIL ME, I WILL ANSWER YOU VERY QUICKLY!

********************

Walt "Butch" Bunn, EMAIL anytime: info@butchscoolstuff.com

or Phone Mon thru Sat, 11AM to 8PM: 937-776-3031

If I am not available, Please LEAVE A MESSAGE, I will return your call.