KUSTOM GRILLES!! (SEE ALL PICS BELOW)

Available NOW! Please call or email your needs.

All NEW reproduction of the Beautifull 1954 Chevy Grille Assembly. These are easily adaptable to most any car. They can be shortened easily by trimming the park lite housing where it bolts to the center bar. They look great complete with stock park lites trimed to fit on 49/51 Mercs, many Ford

& Ply, etc. You can trim the outer returns

off the park lites and then float them in

many grill cavitys, '54 Fords,'55 Ply, etc.

(see 1955 Plymouth at left)                    

Available separately and several different ways.

Center Bar ONLY with 5 teeth....................................$499.

(1 TO 5 Teeth @ $60each)---------------

(6+ Teeth @ $55each)-------------------

COMPLETE '54 GRILLE ASSEMBLIES Below

includes park light housings, park light buckets/lenses

(holes are pre-drilled for amount of teeth ordered):

Above grille with 5 teeth (original style)....................$799.

Same as above except MILD Custom with 9 teeth......$1039.

Same grille except MORE Custom with 13 teeth..........$1259.

Ultimate WILD Custom grille with 17 teeth....................$1479.

ALL ABOVE GRILLES ARE AVAILABLE

WITH THESE SUPER NEAT 1953 CHEVY--------

BULLET STYLE TEETH.......

JUST ADD $20 PER TOOTH --------------------

........TO YOUR ORDER ($75each separately)--

SCROLL DOWN FOR MORE 53/54 CHEVY CUSTOM GRILLES

SUPER NEAT HOTROD & CUSTOM ACCESSORIES

much more coming soon....please check back often!

$139

***WOW***>>>>

$79

QUESTIONS?...Email me at:  info@butchscoolstuff

**NOW SMALLER**

MUFFLERS ARE NOW ALUMINIZED!

Absolutely Beautifull KUSTOM KRAFT Dummy Spots

A faithfull reproduction of the famous Appleton 112 Series

that Barris and most other old time customizers used!!

$300pr

5-1/2" diameter head with 12 position pushbutton adjustment!

Don't forget to check out my NEAT USED GRILLES. I usually have some Desoto or Pontiac or Olds grilles listed on my USED PARTS WEBSITE from time to time at www/swapsellit.com

Pg 3

PG 4

OEM & CUSTOM GRILLES

FOR THE FINEST KUSTOM

1954 CHEVY GRILLE with Thirteen 1953 CHEVY BULLET TEETH, All NEW!

These grilles, in stock fom, require narrowing aprox 3/4" per side to fit the 49/51 Merc. Also the Park Light Housings need to be trimmed and fitted to the Merc Fenders.

Grill as shown above (fit it to YOUR opening & fenders), highly recommended...$1599

Grill as shown above, (fitted to MY '50 Merc), NOT Recommended.............................$1899

    ECONOMY GRILL: ABOVE WITH ONLY 9 TEETH, (in place of 13). Deduct -$300 from either grill above!                (You must make your own mounts)

New Reproduction

53/54 Chevy Grill Parts

now available complete or parts...in stock!

'54 Chev Griiles narrow easily by redrilling the last tooth hole on each end , then sliding the PL housing up under the End teeth for the width you need, then trim the PL Housings to fit the contour of your fenders, sometimes this requires rechroming these housings.

1954

Chevy

Teeth

shown

1953 Chevy Teeth shown

OEM & CUSTOM FLOATER GRILLES

GREAT KUSTOM FLOATER GRILLE FOR ANY CAR    40" Length overall

Grill as shown above (with 9 1953 Bullet Teeth & Large Bullet ends),.......................$1199

Grill similar to above (with 5 1953 Bullet Teeth & Large Bullet Ends)........................$  899

GREAT KUSTOM FLOATER GRILLE FOR ANY CAR    48" Length overall

Grill as shown above (with 11 1954 Chevy Teeth & Dummy Spot ends).....................$1099

NOTE: No lights in ends. YOU could easily install a small light socket and wire it OK!

48" Length overall

40" Length overall

'54 Teeth

'53 Teeth

ABOVE INDIVIDUAL GRILLE PARTS AVAILABLE AND IN STOCK

1953 & 1954 Chevy OEM Replacement Grill Parts

1954 Chevy OEM Grille Bar with 5 holes for teeth

(both 53 & '54 Teeth fit on this bar)....$199

1954 Chevy Park Light Housings with buckets,

bezels and lenses, Complete.....................$299

Or just Park Light Buckets

                                                                  compl with Chrome Bezels

                                                                  gaskets & lenses @ $99pr

1954 Chevy OEM Teeth (5 different sizes/angles) #1 & 2 are one

end, #3 is center, #4 & 5 are other end. Includes mounting hardware.

1 to 5 teeth are $60ea, 6 or more teeth @...........$55ea

'53 Chevy OEM Bullet Teeth (3 diff sizes-Left, Center & Right)

1 to 5 Teeth are $80ea, 6 or more teeth @.$75ea

1

1

2

2

2

3

4

4

4

5

5

1

1

1

1

2

3

3

3

3

The OEM '54 Chevy Center Bar is about 8" too short to reach the 50/51 Ford Parklight Ends. I have the 4" long extension chrome pcs that will bolt under the last tooth on each end to reach....$100pr

(Please scroll down to see more parts on page 4)

(Please scroll down to see more parts on page 5)

1954 Chevy Teeth shown

ABOVE 1954 CHEVY GRILLE with Thirteen 1954 CHEVY TEETH, All NEW!

Grill above w/54 Teeth (fit it to YOUR opening & fenders), highly recommended..$1339

Grill as shown above, (fitted to MY '50 Merc), NOT Recommended..............................$1639

ECONOMY GRILL: ABOVE WITH ONLY 9 TEETH, (in place of 13),......Deduct -$220 from either grill above!

1953 DESOTO ALUMINUM GRILLE TEETH

SET OF

11 REPRO TEETH

RARE, VERY HARD TO FIND in ANY CONDITION, THESE REPRODUCTION TEETH ARE SAND CAST IN MEXICO

Yes, they will need polished, possibly some sand cast pits filled and chrome plated. I will have these available, only in complete sets, from time to time. Please CALL for availability.                       PRICED AT $599 FOR SET OF 11

PLEASE NOTE: These teeth are exactly the same as used in the 51/52 Desoto Grilles except that end teeth are diff.

(Fiberglass 49/51 Merc Pan shown built to accept 51/53 Desoto teeth available ONLY thru "MercuryLand" Parts @ 308-946-2564)

"WOW"

1953 DESOTO END TEETH NOW AVAIL

Reproduction Aluminum Teeth will need Polished and Plated.

Use these to convert the earlier 51/52 with those Park Light end teeth to make them into a 1953 Grill

$88pr

Butch's

Original

Mild Steel

$79

Pg 1

Pg 2

End

Quality

"BCS" parts for quality cars!

$65

$65

$65

$75

$75

If you ain't LOW....

you ain't COOL!!!

Call

for

or

$65 (these include square U-Bolts)

$75 (these include square U-Bolts)

$75

SORRY FOR THE PRICE INCREASE.

ALUMINUM HAS GONE UP QUITE A

BIT

FRONT LOWERING KITS

QUESTIONS?...Email me at:  info@butchscoolstuff

This Kit fits 49/56 Ford/Merc

Also 40/49 Caddy, 55/56 Buick

& 55/56 Ply-Dod-Des cars

#2400.......$90

This Similar Kit fits 39/48 Chevy Cars.............#2401.....$95

NOW AVAILABLE, 2 OUTSIDE TEETH ON EACH END!

HARDEST ONES TO FIND, EVER! $259 for these 4 pcs

or

1 Left & 1 Right Tooth for $159pr

$259 for all

4 End Teeth

$159 for Pr

End Teeth

$599

OEM & CUSTOM GRILLES